Miele K 8652 SD, Инструкции по эксплуатации и монтажу

Страница: 30 / 36

^
Open the door, tilt it downwards and
take it off. Take care not to lose
washer
a
.
^
Using a screwdriver remove covers
b
.
^
Unscrew upper hinge pin
c
using
the spanner supplied, and refit on the
opposite side.
^
Put covers
b
back on again from
behind and then push them firmly
into place from the front.
^
Remove spacer
d
with a screwdriver
and refit it on the opposite side.
^
Remove plug
e
from the door
bearing bush in the door and refit on
the opposite side.
^
Hang the door in hinge pin
c
(remember to use washer
a
), then
close the door.
In the following illustration the door
is not shown in the closed position to
make it easier to see what happens
next.
^
Turn door support
b
around, pull
hinge pin
a
out, and refit on the
opposite side.
^
Fit both parts into hinge plate
f
. To
do this push hinge pin
a
through
hinge plate
f
into door support
b
.
Swing the door support in, push
upwards and re-assemble with screw
c
.
^
Align the door with the appliance
housing using the long slot in hinge
plate
f
. Then tighten screw
c
.
^
Refit plinth fascia
d
, pushing it firmly
into position.
^
With the door open, position cover
e
in the front of the plinth fascia, and
push it firmly into position.
Changing the door hinging
30