Building in
^
Push the appliance into its housing
unit.
When doing this, make sure that the
mains cable does not get trapped.
^
Depending on the thickness of the
appliance housing walls, push the
appliance into the niche until
– the spacer piece touches the
housing unit wall
a
(16 mm thick
walls), – or the front edges of the
hinges are flush with the side walls of
the housing unit
b
(19 mm thick
walls).
The cover strip must
not
protrude in
front of the edge of the housing unit.
It must disappear completely into
the niche.
^
Push the hinged side of the
appliance to the furniture wall.
^
Align the appliance by altering the
adjustable feet using the spanner
supplied
f
.
^
Secure plastic bracket
c
to the side
opposite the hinges using the M5 x
22 countersunk screws
d
.
^
Push the appliance in until the plastic
bracket is flush with the front edge of
the housing unit floor
e
.
^
To fix the appliance to the housing
unit at the top and bottom, screw the
long 4 x 19 mm chip board screws
a
loosely into the hinge.
Building in
33
Содержание K 854 i-1
Страница 29: ...Appliance height mm a Niche height mm b K 854 i 1 1393 1397 1413 Building in dimensions 29 ...
Страница 37: ... Place all covers in position Building in 37 ...
Страница 38: ...38 ...
Страница 39: ...39 ...
