Aligning the appliance
^
Align the appliance with
neighbouring furniture fronts.
The installation aids
c
on the
appliance door are suitable for a
thickness of 19 mm or 38 mm.
The adjustable feet at the front and
back of the appliance can all be
adjusted from the front:
– Front feet:
Adjustment from above with a
socket wrench (attachment: nut,
8 mm)
d
.
– Back feet:
Adjustment with a power drill or
socket wrench (attachment: nut,
8 mm) for fine adjustment
e
.
^
Place a spirit level across the
installation aids
c
on the appliance
door to check the appliance's
alignment.
Important!
Proceed carefully when adjusting
the feet, alternating between the left
and right feet.
^
A mark is located on the appliance
base. When adjusting the height, this
mark needs to be aligned at 32 mm
from the floor. Unscrew the feet until
the mark on the base has reached 32
mm. This measurement of 32 mm
corresponds to a building-in recess
height of 2134 mm.
Important!
Unscrew the feet until the mark is
aligned to a maximum
of 62 mm
from the floor (max. building-in
recess of 2164 mm).
Otherwise the rear feet alignment
will be damaged.
^
Check the alignment of the appliance
again using the spirit level.
Installation
61
