Problem
Possible cause and remedy
After selecting the
Moisture plus
d
function "Fault with
moisture control -
Moisture plus
programme not
available" appears in
the display.
The steam injection system is faulty.
^
Call the Miele Service Department.
^
Use the Fan plus
U
function instead of the Moisture
plus
d
function.
Programmes using
moisture will not take in
water.
^
Check whether "On" has been selected for demo
mode has been activated (see "Settings - Showroom
programme").
The oven can be used in demo mode but the pump for
the steam injection system will not work.
^
Deactivate demo mode.
The food probe is not
recognised by the oven.
You cannot enter a core
temperature.
^
Check that the food probe is engaged in the socket
properly.
If the oven still does not recognise the food probe it
must be faulty.
A replacement food probe can be ordered from Miele
or from your Miele dealer.
A noise can be heard
after a cooking process.
The fan remains switched on after a cooking
programme (see "Settings - Cooling fan run-on").
The rack and other
accessories make a
noise when being
pushed into or pulled
out of the oven.
The pyrolytic resistant surface of the side runners
creates friction when accessories are being pushed
into or pulled out of the oven.
To reduce the friction, add a few drops of heat resistant
cooking oil to some kitchen paper and use this to
lubricate the side runners.
Repeat this after each pyrolytic cleaning process.
Problem solving guide
128
Содержание H6560BP
