Miele H 5361 BP Скачать руководство пользователя

Страница: 28 / 76

Automatic switch-off can be selected
when operating the oven manually.
You can also adjust the heat-up
phase and the humidity level inside
the oven.

To select a function

Select the required function.

The function and recommended
temperature are displayed.

Touch the "OK" sensor.

Options which can be entered or
changed will now appear in the display:

– Duration

– Start time

– Finish

– Moisture reduction

– Core temp.

(This only appears when the food
probe is being used; see "Food
probe" in the separate User
instructions supplied with the oven).

Selecting a temperature

Recommended temperatures

As soon as a cooking function is
selected, the

recommended

temperature

will appear in the display.

Function

Recommended
temperature

Fan plus

160 °C

Intensive bake

170 °C

Conventional
heat

180 °C

Bottom heat

190 °C

Fan grill

200 °C

Full grill

240 °C

Economy grill

240 °C

Defrost

25 °C

[

Auto roast*

160 °C

Moisture plus

160 °C

* Initial searing phase temperature

approx. 230 °C, then drops to 160 °C
for continued roasting

To change the temperature

If the recommended temperature is not
suitable, you can use the temperature
selector to change it.

As soon as you turn the temperature
selector, the temperature range for that
function will appear in the display. The
temperature can be changed in
increments of 5 °.

You can also change the
recommended temperature for a
function permanently if you wish, see
"Settings - Recommended
temperatures".

More about manual operation

Содержание H 5361 BP













































































Результаты поиска

Содержание H 5361 BP

Отзывы:

Похожие инструкции для H 5361 BP

Бренды по названию

Популярные бренды

Miele H 5361 BP, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание H 5361 BP

Отзывы:

Похожие инструкции для H 5361 BP

Бренды по названию

Популярные бренды