Problem
Possible cause and remedy
A noise is heard after a
programme has
finished.
The cooling fan continues to run for a while after a
programme has finished to prevent any humidity
building up in the oven, on the control panel or on the
oven housing unit. When the temperature has fallen
sufficiently, the fan switches off automatically.
An abnormal sound is
heard when the oven is
operating in microwave
mode.
Check if there are sparks caused by using metal dishes
(see "Suitable containers for microwave ovens").
Check if the food is covered with aluminium foil.
If so, remove it.
Check if the rack is inside the oven.
Always use the glass tray when using the oven in
Microwave solo mode.
The microwave works
and the oven heats up,
but the interior lighting
does not come on.
Check if the halogen lamp is defective.
If so, it needs to be replaced as follows.
Disconnect the appliance from the electricity supply
(switch off and unplug at the socket, or remove the
fuse, or switch off at the isolator as appropriate).
The lamp cover consists of two parts: a glass piece
and a mounting.
Hold the lamp cover securely when removing it so
that it does not fall. Place a tea towel over the floor of
the oven and the open door to protect them.
^
Remove the screw to the lamp cover using a T20 torx
screw driver, and take off the cover.
^
Pull the halogen lamp out.
Problem solving guide
67
Содержание H 5030 BM
Страница 75: ...75 ...
Страница 76: ...Alteration rights reserved 22 1311 H 5030 BM H 5040 BM M Nr 07 954 120 01 ...