P
ERFECT
C
LEAN
The following notes on cleaning and
care should ensure that the anti-stick
and easy clean properties of
P
ERFECT
C
LEAN
-surfaces last for many
years. Clean these surfaces as you
would treat glass. If you are unsure
whether a particular cleaning product is
suitable, consider whether you could
use it on a window pane with causing
damage.
Never use cleaning agents
containing alkalines / soda, acids or
chlorides, oven cleaning sprays,
dishwasher detergent or abrasive
cleaning agents, e.g. hard brushes,
scouring pads or steel wool. You
should also avoid using sponges
etc. which have previously been
used with abrasive cleaning agents,
as these would damage the surface.
Do not clean the baking tray, grill
pan, rack or side runners in a
dishwasher.
Light soiling should be cleaned after
each use with a dishcloth, soft sponge
or a soft nylon brush using a solution of
hot water and a little washing up liquid.
The surfaces will become harder to
clean and the anti-stick properties will
deteriorate if soiling is not removed
after each use and allowed to build up.
In extreme cases cleaning may even
become impossible.
Stubborn soiling e.g. from roasting
should be soaked first and removed as
soon as possible after cooking. If
necessary, use a soft sponge, soft
nylon brush or a scraper suitable for
glass surfaces to loosen the soiling.
After cleaning, rinse thoroughly with
clean water to remove any cleaning
agent residues. The water must run off
the surface easily. Wipe dry using a soft
cloth.
Using oven sprays on stubborn
soiling
Some oven cleaners contain strong
alkalines and / or abrasive materials.
Because the enamel is designed to
be easily cleaned the use of these
cleaners is not recommended.
However if you still cannot get the
surface clean an oven cleaner can be
used.
Allow the P
ERFECT
C
LEAN
surfaces to
cool down to room temperature and
then apply a spray oven cleaner to the
soiled areas. Do not attempt to use on a
hot oven or accessories. Leave to take
effect for a max. of 10 minutes only!
Please also observe the manufacturer's
instructions.
If necessary use a soft sponge, soft
nylon brush or a scraper suitable for
glass surfaces to loosen the soiling.
Repeat the process if necessary.
After cleaning, rinse thoroughly with
clean water to remove any cleaning
agent residues. The water must run off
the surface easily. Wipe dry using a soft
cloth.
Cleaning and care
54
Содержание H 4900 B
Страница 62: ...Appliance and building in dimensions Installation 62 ...
Страница 67: ...67 ...