Cleaning catalytic enamel surfaces
using high temperatures
If, after manual cleaning, the oven is
still heavily soiled heating it to a high
temperature will help remove soiling
caused by oil and grease splashes
from the catalytic surfaces.
Before cleaning the catalytic panels
using high temperatures, make sure
that all PerfectClean surfaces have
been cleaned as previously
described. Otherwise, the high
temperatures can cause deposits on
PerfectClean surfaces to become
baked on and impossible to remove.
To clean using high temperatures:
^
Take all accessories out of the oven.
^
Select Fan Heat
D
.
^
Select the highest temperature
setting.
Run the oven for approx. 1 hour. The
length of time will depend on the level
of soiling.
Any remaining soiling will gradually
disappear with each subsequent use of
the oven at high temperatures.
The timer can also be used to set the
finish time (see "Switching off
automatically").
Should the catalytic coating on the
back panel, side liners or the roof
liner become ineffective through
improper use or heavy soiling, a
replacement can be obtained from
your Miele dealer or the Miele Spare
Parts dept.
Cleaning and care
56
