. . . spots like rust appear on cata-
lytic surfaces.
When roasting on the rack, the circulat-
ing air sometimes picks up spices,
which are then deposited on the oven
interior walls. Such residues are not
removed by catalytic cleaning, they are
best removed while fresh with a mild
washing up liquid solution and a soft
brush.
. . . there has been a power failure,
and instead of the time of day "0
····
00"
and "AUTO" flash in the display.
All pre-set times are deleted as a result
of the power failure.
Enter the time of day again, and any
other pre-set data.
. . . "0
····
00" appears when the audible
tone is switched off.
This is not a fault.
The time of day will shortly reappear in
the display field.
. . . "AUTO" flashes in the timer dis-
play.
This might signal a data entry mistake,
– for example entering conflicting
times.
– if the time of day is changed while a
start and finish time have been pre-
set.
– when the audible tone is switched off
by pressing the "
g
" and "
)
" but-
tons.
Correcting minor faults
60