Installation
-
I
N
-
S
T
A
L
L
-
A
-
T
I
O
N
-
84
Electrical connection: Other coun-
tries
All electrical work should be carried out
by a suitably qualified and competent
Miele approved service technician in
strict accordance with local and na-
tional safety regulations.
Connection should be made via a fused
connection unit or a suitable isolator,
which complies with national and local
safety regulations, and the on/off switch
should be easily accessible after the
appliance has been installed.
If the switch is not accessible after in-
stallation (depending on country) an ad-
ditional means of disconnection must
be provided for all poles.
Switches with a minimum all-pole con-
tact gap of 3 mm are suitable for isolat-
ing the appliance. These include circuit
breakers, fuses and protective devices.
The voltage and rated load are given on
the data plate situated at the front of
the oven interior. Please ensure that
these match the household mains sup-
ply.
For extra safety it is advisable to install
a suitable residual current device
(RCD) / ground fault interrupter (GFI).
Contact a qualified electrician for ad-
vice.
If the cord is damaged a new cord must
be fitted by a Miele approved service
technician.
WARNING - THIS APPLIANCE
MUST BE EARTHED
Hong Kong
This appliance is supplied with a power
cord with plug for connection to a
230 V, 50 Hz socket outlet.
Taiwan
This appliance is supplied with a power
cord with plug for connection to a
220 V, 60 Hz socket outlet.
Содержание H 2265-1 BP
Страница 79: ...Installation I N S T A L L A T I O N 79 Side view of H 22xx ...
Страница 80: ...Installation I N S T A L L A T I O N 80 Side view H 28xx H 25xx H 27xx A H 25xx H 27xx 43 mm H 28xx 47 mm ...
Страница 100: ...M Nr 11 190 060 02 en GB H 2265 1 BP H 2267 1 BP H 2760 BP H 2860 BP H 2850 BP ...