Miele H 135 MB, Руководство по эксплуатации

Страница: 69 / 80

Problem solving guide
. . . a process will not start.
Check whether:
– if operating in microwave mode the
appliance door is properly shut,
– if operating in microwave mode a
power setting and time have been
entered,
– if operating with a combination pro-
gramme, the following have been en-
tered: a power setting, a time, a time
for the microwave mode and a tem-
perature for the normal oven opera-
ting mode.
– if operating with an Automatic pro-
gramme the weight has been en-
tered.
. . . the microwave / heating function-
s but not the interior lighting.
Check whether the oven interior light-
ing has been switched off, (see Sec-
tion on choosing oven with or without
interior lighting).
If this is not the case, the halogen bulb
needs replacing.
Change for a new one as follows:
Disconnect the appliance from the
electricity supply, (switch off and un-
plug at the socket or switch off at
the isolator as appropriate).
Loosen and remove the lamp covers
(1.). This may be easier using a rub-
ber glove.
Take out the halogen lamps (2.).
Fit new halogen lamps.
Connection data for halogen lamps:
12 V, 10 W,
temperature resistant up to 300 °C,
W271 socket, Osram, Type 64418
The wires must lie horizontally to the ap-
pliance. Push the lamps in until they en-
gage.
Screw the lamp cover back on.
Reconnect the appliance to the
mains supply.
69