Miele G7106 Скачать руководство пользователя страница 13

Страница: 13 / 96

Warnings and safety instructions

Accessories and spare parts



Only use original Miele accessories. If other parts are used,

warranty, performance, and, if applicable, product liability claims will
be invalidated.



Miele will guarantee to supply functional spare parts for a

minimum of 10 years and up to 15 years following the
discontinuation of your dishwasher.

Transport



Damage to the dishwasher can compromise your safety. Before

using the dishwasher, check it for any visible transport damage.
Never use a damaged dishwasher.



Only transport the dishwasher in an upright position so that no

water flows into the electrical controls, as this would cause faults.



If you wish to transport the dishwasher, empty it and securely

fasten all loose parts such as baskets, hoses, and power cables.

Disposal of your old dishwasher



Remove the door of the dishwasher so that children cannot

become trapped inside.

Содержание G7106

































































































Результаты поиска

Содержание G7106

Отзывы:

Похожие инструкции для G7106

Бренды по названию

Популярные бренды

Miele G7106, Руководство по эксплуатации

Результаты поиска

Содержание G7106

Отзывы:

Похожие инструкции для G7106

Бренды по названию

Популярные бренды