Guide to the dishwasher
18
Display functions
General information
The display is used to select or set the
following:
– The program
– The FlexiTimer (Delay Start)
– The Settings menu
The display can show the following:
– The current time of day
– The program stage
– The estimated time left for the pro-
gram to run
– Any relevant fault messages and in-
formation
To save energy, the dishwasher
switches off after a few minutes if you
do not press any buttons during this
time.
To switch the dishwasher back on
again, press the
button.
Settings menu
The Settings menu is used to adapt the
electronic module of the dishwasher to
changing requirements. See the "Set-
tings menu" chapter for more informa-
tion on accessing the settings menu.
The arrows in the display indicate addi-
tional options. You can use the
ar-
row buttons underneath the display, as
appropriate, to select these options.
The
OK
button is used to confirm a
message or setting and also to move to
the next menu or another level.
The option which is selected will have a
check
next to it.
To exit a sub-menu, use the
arrow
buttons to select the
Back
option in
the display and confirm your choice
with
OK
.
If you do not press any of the buttons
for several seconds, the display with re-
turn to the previous level. You may need
to enter your settings again.
Содержание G6835SCI
