Cleaning and care
74
Cleaning the spray arms
Particles of food can get stuck in the
spray arm jets and bearings. The spray
arms should therefore be inspected reg-
ularly (approx. every 2–4 months).
Damage due to soiling entering
the circulation system.
Without filters, soiling can enter the
circulation system and cause a
blockage.
Do not run a wash program without
the lower spray arm or without the fil-
ters.
When cleaning the filters and spray
arms, make sure that coarse soiling
cannot get into the circulation sys-
tem.
Turn off the dishwasher.
Removing the upper and middle
spray arms
Take out the 3D MultiFlex Tray (if your
dishwasher is fitted with one).
Push the upper spray arm upwards to
engage the inner ratchet. Then un-
screw the spray arm by rotating the
screw thread counterclockwise.
Rotate the screw thread of the middle
spray arm clockwise
(see diagram)
and remove the spray arm
.
Removing the lower spray arm
Remove the lower basket.
Rotate the screw thread of the lower
spray arm counterclockwise
and
pull the spray arm upwards to re-
move
.
Содержание G 7961
Страница 2: ......
Страница 6: ...Contents 6 Factory default 116 Sound emission testing 117 ...
Страница 120: ...M Nr 11 501 470 00 en US G 7961 G 7966 ...