Miele G 7827, Инструкции по эксплуатации и монтажу

Страница: 17 / 48

Mobile unit coding strip
15 different codes can be set. They are
assigned to program places 1 to 15.
Under "System function - Selector
switch organization" the matching
programs have to be put into the first
15 program places.
Prog.-
place Bit 1 Bit 2 Bit 3 Bit 4 Bit 5
Parity-
Bit
- 0 0 0 0 0
1 l 0 0 0 l
2 0 l 0 0 l
3 l l 0 0 0
4 0 0 l 0 l
5 l 0 l 0 0
6 0 l l 0 0
7 l l l 0 l
8 0 0 0 l l
9 l 0 0 l 0
10 0 l 0 l 0
11 l l 0 l l
12 0 0 l l 0
13 l 0 l l l
14 0 l l l l
15 l l l l 0
The coded total must be an even
number. Bit 6 is not included in this
calculation.
If the coded total equals an odd number
the message CHECK MOBILE UNIT
RECOGNITION will appear. If the mobile
unit code equals 0, the message NO
MOBILE UNIT RECOGNITION will
appear. In both cases the program
cannot be started. The mobile unit
recognition must be reset.
Setting mobile unit coding
To set or alter the coding of a mobile
unit with automatic recognition (AWK)
proceed as follows:
^
Unscrew the track with an AWK (allen
wrench) and remove it from the
retainer.
^
Remove the magnetic strip from the
track.
Automatic mobile unit recognition (AWK)
17