Miele G 6990, Руководство по эксплуатации

Страница: 23 / 104

Before using for the first time
23
Water hardness
The display will change to the screen
for setting the water hardness.
– The dishwasher must be program‐
med for the water hardness in your
area.
– Your local water authority will be able
to advise you of the water hardness
level in your area.
– Where the water hardness fluctuates
e.g. between 1.8 and 2.7 mmol/l (10 -
15 °d - German scale) always pro‐
gramme the dishwasher to the higher
value (2.7 mmol/l or 15 °d in this ex‐
ample).
In the event of a fault, it will help the
service technician if you know the hard‐
ness of your local water supply.
Enter the water hardness below:
____________°d
The dishwasher is programmed at the
factory for a water hardness level of 2.7
mmol/l (15 °d - German scale).
 Use the  arrows to select the
hardness of your water supply and
confirm with
OK
.
See "Settings menu - Water hardness"
for more information.
The message
Set-up successfully comple-
ted
will then appear in the display.
After confirming this with
OK
, the
prompts

Insufficient salt
and

Insuffi-
cient rinse aid
may appear.

Add salt and rinse aid if necessary
(see "Before using for the first time -
Dishwasher salt" and "Rinse aid").
 Confirm the messages with
OK
.
The display will change to show the
main menu.
The prompt to set the dishwasher up
for first use will not appear again after
you have run the first complete pro‐
gramme.