Problem
Possible cause
Remedy
Dishes and glasses are
not dry or are flecked
The rinse-aid amount set
may be insufficient, or the
rinse-aid reservoir empty.
Increase the dosage or
replenish the reservoir,
see “Before using for the
first time”.
The water hardness level
selector in the wash
cabinet is set too high.
Set the selector to a
lower setting, See
“Programming and
setting the water
hardness level”.
Crockery was taken out
of the cabinet too soon.
Leave it in for longer, see
“Operating the
dishwasher”
The dishes are not clean
The dishes were not
loaded correctly. Dishes
were placed inside other
pieces, water could not
access all surfaces.
See notes in “Loading the
dishwasher”.
The outlet of the water
intake pipe for the middle
spray arm was covered.
An insufficient amount of
water flowed into the
middle spray arm.
Make sure that dishes
inserted in the rear
section of the upper
basket do not cover the
pipe outlet.
The programme was not
powerful enough.
Select a more intensive
programme see
“Programme chart” at the
end of these operating
instructions.
Not enough detergent
was dispensed.
Use more detergent, see
“Operating the
dishwasher”.
Tall items are blocking
the path of the spray
arms.
Rearrange items so that
the spray arms can rotate
freely.
The spray arm jets are
blocked.
Clean the spray arm jets,
see “Cleaning and care”.
Problem solving guide
49
Содержание G 686
Страница 59: ...Cutlery tray Comparison tests 59 ...
Страница 65: ...65 ...
Страница 66: ...66 ...
Страница 67: ...67 ...