Problem
Possible cause
Remedy
A whistling noise is
heard during the pro-
gramme
The axial face seal of the
circulation pump
sometimes makes a
whistling noise. This may
be caused by detergent.
This is not a problem. Try
out other detergents.
Consult the Miele Service
Department if the noise is
permanent.
Knocking noise in the
water pipes
This may be caused by
the on-site installation or
the cross-section of the
piping.
This has no influence on
dishwasher function. If in
doubt contact a suitably
qualified plumber.
Three horizontal bars
show in the time dis-
play at the end of the
programme:
– – –
There may be a technical
fault.
–
Turn the programme
selector to the “Stop”
position.
–
Switch the dishwasher
off using the “On/Off”
button.
After a few seconds:
–
Turn the dishwasher on
using the “On/Off”
button.
–
Turn the Programme
selector to the required
programme.
–
Press the “Start” button.
If the three horizontal
bars appear again at the
end of the programme,
there is a technical fault.
–
Call the Miele Service
Department.
Despite the problem the
dishwasher can be used
in all programmes.
However the water will
not heat up. The “Energy
save” programme only
works if the dishwasher is
connected to a hot water
supply.
Problem solving guide
48
Содержание G 686
Страница 59: ...Cutlery tray Comparison tests 59 ...
Страница 65: ...65 ...
Страница 66: ...66 ...
Страница 67: ...67 ...