Programme options
65
Factory default settings
If you have altered any settings from the
factory default, you can reset them
back to the factory default settings as
follows:
Open the door.
Switch the dishwasher off with the
button, if it is switched on.
Press the programme selector button
in and,
whilst holding it in
, switch
the dishwasher on using the
button.
Keep the programme selector button
pressed in for at least 4 seconds
until the lower right-hand programme
indicator comes on.
If this does not happen, start the
procedure from the beginning again.
Press the
button 19 times.
The
indicator light will do 1 long
flash and 9 short flashes at intervals.
The flashing sequence in the display
indicates whether a setting has been
changed from its factory default.
–
: All settings are set to factory
default settings.
–
: At least one setting has been
changed.
To reset the dishwasher to the factory
default settings, press the
programme selector button
.
The setting is now stored in memory.
Switch the dishwasher off with the
button.
Содержание G 6660
