Programme options
63
AutoOpen
At the end of programmes with a drying
phase (see "Programme chart") the
door will open automatically a little in
order to help the drying process.
This function can be deactivated if
wished.
Open the door.
Switch the dishwasher off with the
button, if it is switched on.
Press the programme selector
button
in and,
whilst holding it in
,
switch the dishwasher on using the
button.
Keep the programme selector
button
pressed in for at least four
seconds until the lower right-hand
programme indicator comes on.
If this does not happen, start the
procedure from the beginning again.
Press the
button seven times.
The
indicator will flash rapidly seven
times at intervals.
The flashing sequence in the display
indicates whether the "AutoOpen"
function is activated or not.
–
: "AutoOpen" is activated.
–
: "AutoOpen" is deactivated.
Press the programme selector
button
if you wish to change the
setting.
The setting is now stored in memory.
Switch the dishwasher off with the
button.
If you have deactivated the
automatic door opening function but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully. Otherwise steam from the
dishwasher could damage the edge
of the worktop because the fan is no
longer running.
Содержание G 6660
