Miele G 643 Скачать руководство пользователя страница 3

Страница: 3 / 40

Installation

Installation, maintenance and
repair work should be by a Miele

authorized service technician. Work by
unqualified persons could be a hazard
and may void the warranty.

This equipment is not designed for
maritime use or for use in mobile

installations such as caravans or
aircraft. However, under certain
conditions it may be possible for an
installation in these applications. Please
contact the nearest Miele dealer or the
Miele Technical Service Department
with specific requirements.

Inspect the dishwasher for
transport damage. Do not install or

use a damaged unit. Contact the place
of purchase.

This dishwasher must be installed
under a continuous countertop

secured to adjacent cabinetry.

Do not install this dishwasher
beneath a cooking surface or oven.

Do not, under any circumstances,
cut the intake hose or submerge in

liquid. This hose contains electrical
components that could cause injury or
property damage if cut or submerged.

If there is any doubt concerning
installation contact the Technical

Service Department.

USA 1-800-999-1360

[email protected]

CDN 1-800-565-6435

[email protected]

During the installation process,

please be careful of sharp edges
that can cause harm.

IMPORTANT SAFETY INSTRUCTIONS

Содержание G 643









































Результаты поиска

Содержание G 643

Отзывы:

Похожие инструкции для G 643

Бренды по названию

Популярные бренды

Miele G 643, Руководство по установке

Результаты поиска

Содержание G 643

Отзывы:

Похожие инструкции для G 643

Бренды по названию

Популярные бренды