Problem
Possible cause
Remedy
The dishes are not clean
The dishes were not
loaded correctly. Dishes
were placed inside other
pieces, water could not
access all surfaces.
See notes in “Loading the
dishwasher”.
The outlet of the water
intake pipe for the middle
spray arm was covered.
An insufficient amount of
water flowed into the
middle spray arm.
Make sure that dishes
inserted in the rear
section of the upper
basket do not cover the
pipe outlet.
The programme was not
powerful enough.
Select a more intensive
programme see
“Programme chart” at the
end of these operating
instructions.
Not enough detergent
was dispensed.
Use more detergent, see
“Operating the
dishwasher”.
Tall items are blocking
the path of the spray
arms.
Rearrange items so that
the spray arms can rotate
freely.
The spray arm jets are
blocked.
Clean the spray arm jets,
see “Cleaning and care”.
The filter combination in
the base of the wash
cabinet is not clean or is
not correctly fitted.
This may cause the spray
arms jets to get blocked.
Clean and/or replace the
filter combination
correctly.
Clean the spray arm jets,
see “Cleaning and care”.
The drain pump or non-
return valve may be
blocked.
Clean the drain pump
and the non-return valve,
see section on this.
Too little water in the
wash cabinet.
Check the water level
and if necessary increase
the water intake time, see
sections on these.
Problem solving guide
47
Содержание G 640
Страница 58: ...Dishwashers with cutlery tray Upper basket Cutlery tray Lower basket Comparison tests 58 ...
Страница 63: ...63 ...