manualshive.com logo in svg

Miele G 5266, Руководство по эксплуатации, Страница: 22 / 92

Поделиться
Скачать
Miele G 5266 Скачать руководство пользователя страница 22

Initial commissioning

22

Displaying and setting the water
hardness level

Open the door.

Turn the dishwasher off with the

 button, if it is turned on.

Press the 

 button in and, 

while

holding it in

, turn the dishwasher on

using the 

 button.

Keep the 

 button pressed in for at

least 4 seconds until the 

 indicator

light comes on.

If this does not happen, start the
procedure from the beginning again.

Press the 

Program

 button 2 times.

The top left program indicator light will
flash rapidly 2 times at intervals.

The value set for the water hardness is
shown as a figure after 

 in the time

display.

  4

 will start flashing in the time

display.
A water hardness of 14 gr/gal (14 °dH –
German scale) is set.

Use the 

 button to set the water

hardness value in your area.
The dosage amount increases each
time you press the button. When the
highest value is reached, the setting
starts again from the beginning.

The setting is now saved.

Turn the dishwasher off with the

 button.

Содержание G 5266





























































































Отзывы:

Нет отзывов