Operation
38
Interrupting a program
A program will be interrupted as soon
as the door is opened.
Close the door and press the
Start
button.
The program will continue from the
point at which it was interrupted.
Water in the dishwasher may be
hot. Danger of scalding!
Only open the door if absolutely nec-
essary and exercise extreme caution
when doing so. Before closing the
door again, leave it ajar for approx.
20 seconds. This will enable the tem-
perature in the wash cabinet to set-
tle. After that, close the door and
press the
Start
button.
Changing a program
If the detergent dispenser flap has al-
ready opened, do not change the
program.
If a program has already started and
you wish to change it, proceed as fol-
lows:
Open the door.
Turn the dishwasher off with the
button.
Turn the dishwasher on again with the
button.
Select the desired program.
Start the program by closing the door
within four seconds.
Содержание G 4993
Страница 66: ...66 ...
Страница 76: ...M Nr 10 654 330 00 en US G 4993 G 4998 ...