Options
43
Buzzer tones
A sequence of audible tones will sound
at the end of the program or if there is a
fault.
The buzzer at the end of a program and
the warning buzzer in the event of a
fault will sound 4 times at intervals with
a short pause between each set.
The buzzer tones are activated at the
factory.
You can deactivate the buzzer that
sounds at the end of a program if you
wish. The warning buzzer for faults can-
not be deactivated.
Open the door.
Turn the dishwasher off with the
button, if it is turned on.
Press the program selection button
, and,
simultaneously
switch the
dishwasher on using the
button.
Keep the program selection button
pressed in for at least four seconds
until the lower right program indicator
light comes on.
If this does not happen, start the proce-
dure from the beginning again.
Press the
button 4 times.
The
indicator light will flash 4 times
at short intervals.
The flashing sequence in the time dis-
play shows whether the buzzers at the
end of the program are activated or de-
activated.
–
: Buzzer tones activated
–
: Buzzer tones deactivated
Press the program selection button
to change the setting.
The setting is now stored in memory.
Turn the dishwasher off with the
button.
Содержание G 4993
Страница 66: ...66 ...
Страница 76: ...M Nr 10 654 330 00 en US G 4993 G 4998 ...