Options
43
Optimize Standby
"Optimize Standby" is activated by de‐
fault.
To save energy, the dishwasher will
switch off automatically a few minutes
after the last time a button has been
pressed or after the end of a program.
The dishwasher will not turn off while
a program is running, during the delay
start period, or if there is a fault.
Optimize Standby can be switched off if
you prefer. If you do this the duration
before the dishwasher switches off au‐
tomatically increases to 6 hours. Doing
this will increase energy consumption.
ĺ
Open the door.
ĺ
Turn the dishwasher off with the
ɶ
button, if it is turned on.
ĺ
Press the program selection button
Ҳ
, and,
simultaneously
switch the
dishwasher on using the
ɶ
button.
Keep the program selection button
Ҳ
pressed in for at least four seconds
until the lower right program indicator
light comes on.
If this does not happen, start the proce‐
dure from the beginning again.
ĺ
Press the
Ц
button 8 times.
The
Ц
indicator light will flash 8 times
at short intervals.
The flashing sequence in the display
shows whether or not Optimize Stand‐
by is activated.
–
ɠɇ
: "Optimize Standby" activated
–
ɠɆ
: "Optimize Standby" deactivated
ĺ
Press the program selection button
Ҳ
to change the setting.
The setting is now stored in memory.
ĺ
Turn the dishwasher off with the
ɶ
button.
Содержание G 4970
Страница 64: ...64 ...
Страница 73: ......
Страница 74: ......
Страница 76: ...M Nr 10 014 080 03 en US G 4970 G 4975 ħ ...