Maintenance
81
Cleaning the water inlet filter
A filter is incorporated in the screw
connection of the valve on the water
inlet hose. The filter must be cleaned
when dirty, otherwise insufficient water
flows into the wash cabinet.
The plastic housing of the water
connection contains an electrical
component.
The housing must not be dipped in
water.
Recommendation
If the mains water contains a large
amount of insoluble substances, we
recommend fitting a large-area filter in
the connection between the tap and the
water inlet hose threaded union. This
filter is available from Miele.
Cleaning the filter:
Disconnect the dishwasher from the
mains supply.
Switch off at the mains socket and
withdraw the plug.
Turn off the tap.
Unscrew the inlet hose.
Carefully remove the washer.
Withdraw the filter using pointed
pliers and rinse clean under running
water.
Replace the filter and washer, making
sure they are sitting correctly.
Reconnect the inlet hose to the tap,
making sure it goes on correctly and
is not cross-threaded.
Turn on the tap.
If water leaks out, the inlet hose may
not be connected securely or it may
have been screwed on at an angle.
Unscrew and reconnect the inlet hose
correctly.
Содержание G 4930
