General problems with the dishwasher
Issue
Possible fault
Solution
The display turns off.
The dishwasher has gone
into "Standby" mode to save
energy.
Press any button.
The display turns on
again.
Detergent is left in the
dispenser at the end
of a program.
The dispenser was damp
when detergent was added.
Dry the dispenser before
adding detergent.
The detergent lid
cannot be closed
properly.
Detergent residue is
blocking the catch.
Remove the residue.
The door and the
interior walls are still
wet after a program
has finished.
This is not a fault!
It is the normal operating
mode of the drying system.
The moisture will
evaporate after a short
time.
Water remains in the
wash cabinet at the
end of a program.
Before fixing the fault:
– Turn the dishwasher off
"
o
".
The triple filter in the wash
cabinet is clogged.
Clean the triple filter. See
"User Maintenance
Instructions".
The drain pump or the
non-return valve may be
blocked.
Clean the drain pump and
the non-return valve, see
maintenance instructions.
The drain hose is kinked.
Remove any kinks from the
drain hose.
Frequently asked questions
34
