Programming the water
softener
To exit the programming mode at
any time, turn the dishwasher off
with the "O" button.
^
Turn the dishwasher off with "
o
".
^
Press and hold the "Program" and "
g
"
buttons
simultaneously
. Hold the
program button until the lower right
program indicator lights.
If it does not come on, start over.
^
Press the "Program" button twice.
The "Intake/Drain" indicator
The "Intake/Drain" indicators flashes
twice in the display.
The "SaniWash" indicator flashes once
in intervals (factory default).
^
Press the "Program" button for at
least one second, until the
"Intake/Drain" indicator lights up.
The amount set can be recognized by
the flashing rhythm of the "SaniWash"
indicator (see table):
°d
gr/gal
Flashing rhythm
1 - 4
1 - 4
once
5 - 7
5 - 7
twice
8 - 11
8 - 11
3 times
12 - 15
13 - 16
4 times
16 - 20
17 - 21
5 times
21 - 25
22 - 26
6 times
26 - 30
27 - 31
7 times
31 - 36
32 - 38
8 times
37 - 45
39 - 47
9 times
46 - 70
48 - 73
1 long flash
^
Select the desired setting with the
"Program" button. Every touch of the
button increases the level.
The programmed dosage is saved.
^
Turn the dishwasher off "
V
".
Checking the programmed water
hardness level
^
Turn the dishwasher off "
V
".
^
Press the "Program" button, at the
same time turn the dishwasher on "
g
".
Hold the "Program" button in until the
indicator lights up.
^
Press the "Program" button twice.
The amount set can be recognized by
the flashing rhythm of the "SaniWash"
indicator (see table).
^
Turn the dishwasher off "
V
".
Before using for the first time
12
