Adjust Sensor wash
You can adjust the Sensor wash
programme so that it will remove
stubborn soiling in a lightly soiled load.
^
Open the door.
^
Switch the dishwasher off with the Off
button
V
.
^
Press the programme selector button
in, and
whilst holding it in
switch
the dishwasher on using the On
button
U
.
Keep the programme selector button
pressed in for at least four seconds
until the lower right hand programme
indicator comes on.
If this does not happen, start the
procedure from the beginning again.
^
Press the Turbo/Tab button five
times.
The Tab indicator light will flash briefly
five times at intervals.
The message flashing in the Time
display shows whether the Adjust
Sensor wash function is activated or
deactivated.
– "
p 1
": The Adjust Sensor wash
function is activated.
– "
p 0
": The Adjust Sensor wash
function is deactivated.
^
To change the setting, press the
programme selector button.
Switch the dishwasher off with the Off
button
V
.
Additional functions
44
Содержание G 1XXX
Страница 74: ...74 ...
Страница 75: ...75 ...
Страница 76: ...Alteration rights reserved G1283 G2283 1608 M Nr 07 066 551 01 ...