Miele G 1830 Скачать руководство пользователя страница 79

Страница: 79 / 88

Temperature

You can chose for the temperature to
be displayed as °C/Celsius or
°F/Fahrenheit.

The temperature is set at the factory to
be displayed in °C.

Select the option you want and
confirm with

Buzzer

When the buzzer is activated, an
audible tone sounds at the end of a
programme and when there is a fault.

The buzzer at the end of a programme
is deactivated as standard at the
factory.

The buzzer will still sound if there is a
fault, even if it has been deactivated.

Buzzer at the end of a programme

You will hear the buzzer at the end of a
programme in bursts of five with a short
pause in between. The buzzer will
continue to sound for up to an hour if
you do not switch the dishwasher off.

Buzzer when there is a fault

In the case of a fault, the buzzer will
sound continuously for up to two
minutes if you do not switch the
dishwasher off or correct the fault.

Setting the buzzer volume

You can select one of two options or
deactivate the buzzer.

Off

The buzzer at the end of a programme
is deactivated.

Normal

The buzzer sounds at a "normal"
volume.

Loud

The buzzer sounds louder.

Select the volume you want or
deactivate the buzzer.

Confirm with

Settings menu

Содержание G 1830

























































































Результаты поиска

Содержание G 1830

Отзывы:

Miele G 1830, Руководство по эксплуатации, Страница: 79 / 88

Результаты поиска

Содержание G 1830

Отзывы: