General problems
Problem
Possible cause
Remedy
The display is dark.
The display has
switched off
automatically to save
energy (Standby
mode).
Press any sensor pad.
Stand-by comes to an end
(see "Settings menu
J
,
Standby").
The buzzer sounds
during a programme.
The following fault
message appears in the
display:
Salt reservoir cover
Close the salt reservoir
The salt reservoir has
not been closed
properly.
– Close it.
If the salt reservoir has
opened during a programme
you must also:
–
Switch the dishwasher off
and then back on again
with the On/Off sensor pad
s
.
–
Start the programme
again.
The following fault
message appears in the
display:
Middle spray arm
blocked
or
Bottom spray arm
blocked
Items are blocking the
path of the middle or
the bottom spray arm.
Open the dishwasher door
and rearrange the items
which are obstructing the
spray arm.
The middle or bottom
spray arm jets are
blocked.
–
Switch the dishwasher off
with the On/Off sensor pad
s
.
Then:
–
Clean the spray arm. See
"Cleaning and care".
Problem solving guide
51
Содержание G 1830
Страница 85: ...85 ...
Страница 86: ...86 ...
Страница 87: ...87 ...
Страница 88: ...Alteration rights reserved G1830 G2830 1106 M Nr 06 702 790 02 en GB ...