The dishwasher does not fill/drain.
Problem
Possible cause
Remedy
The dishwasher
stops working
shortly after the start
of the programme.
The buzzer sounds.
The Inlet/Drain
indicator flashes
when the door is
opened.
The stopcock is
closed.
– Open the stopcock fully.
The dishwasher
stops during a
programme.
The buzzer sounds.
The Inlet/Drain check
indicator flashes
when the door is
opened.
Before rectifying the problem you
must:
– Switch the dishwasher off with the
Off button
V
.
Water intake is
restricted.
– Open the stopcock fully.
– Clean the water inlet filter (see
"Maintenance").
– The water pressure at the intake is
lower than 30 kPa (0.3 bar).
Seek professional advice.
Water outlet is
restricted, water
remains in the
wash cabinet at
the end of a
programme.
– Clean the filter combination. See
"Cleaning and care".
– Clean the drain pump. See
"Maintenance".
– Clean the non-return valve. See
"Maintenance".
– Remove any kink in the drain
hose.
Problem solving guide
43
Содержание G 1162 SCVi
Страница 61: ...61 ...
Страница 62: ...62 ...
Страница 63: ...63 ...
Страница 64: ...Alteration rights reserved G1162 0410 M Nr 07 502 100 01 ...