Issue
Possible fault
Fix
Dishes are not dry,
glasses and cutlery
are spotted.
The rinse aid setting may be
too low, or the rinse aid
reservoir is empty.
Increase the dosage, refill
the reservoir or switch the
rinse aid product when
refilling, see "Before using
for the first time".
Dishes were taken out too
soon.
Leave dishes in longer, see
"Use".
A "2 in 1" product was used.
These products have a low
drying effect.
Set the Detergent setting to
"Powder" and add rinse aid.
The Detergent setting "2 in
1" or "Gel" is turned on, but
another product was used.
Set the Detergent setting to
the detergent used, see
"Detergent settings".
White residue is
visible on cutlery
and dishes.
Clouding occurs on
glassware and film
can be wiped off.
Not enough rinse aid was
used.
Increase the dosage, see
"Before using for the first
time".
The salt container is empty.
Refill the salt container, see
"Before using for the first
time".
The salt container lid was
not correctly screwed on.
Reseat it making sure it
screws back on correctly.
Unsuitable "2 in 1" or "Gel"
products were used.
Change detergent, use
normal tabs or normal
powder detergent.
The automatic water
softener unit is defective.
Contact Miele’s Technical
Service.
Frequently asked questions
42
Содержание FULLSIZE DISHWASHER - OPERATING
Страница 46: ...46 ...
Страница 54: ...54 ...
Страница 60: ...Alterations reserved 1906 G 1470 Vi G 2470 Vi M Nr 06 696 060 02 en US ...