manualshive.com logo in svg

Miele FN 3x402 i AU, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele FN 3x402 i AU Скачать руководство пользователя страница 57

Installation advice

57

Top ventilation cross-section

The top ventilation cross-section can

be achieved in various ways:

a

directly above the appliance with a

ventilation grille (free airflow of at

least 200 cm²).

 

b

Between furniture units and the

ceiling.

 

c

In an intermediate ceiling.

 

Before installing the appliance

Take the accessory pack which

includes installation parts and other

accessories out of the appliance and

remove the packaging strap holding

the door in place.

Do not remove

 the following from

the rear of the appliance:

– The spacers (depending on

model).These ensure the gap

required between the back of the

appliance and the wall is maintained.

– The bags (depending on model)

located inside the metal grille (heat

exchanger).

These are important for the correct

functioning of the appliance. Their

contents are non-toxic and are not

dangerous.

Remove any cable clips from the

back of the appliance.

Check that all parts at the back of the

appliance are unhindered. Carefully

remove any hindrance.

Содержание FN 3x402 i AU





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды