manualshive.com logo in svg

Miele FashionMaster, Руководство по эксплуатации

Поделиться
Скачать
Miele FashionMaster Скачать руководство пользователя страница 76

Electrical connection UK

76

Before you connect the steam iron-
ing system, you must check the con-
nection data (voltage and frequency)
on the data plate and compare it with
the data applicable to your local
power supply.
Compliance with this data is mandat-
ory, otherwise there is a risk of dam-
age to the steam ironing system.
If in doubt, consult a suitably quali-
fied electrician.

You will find the necessary connection
data on the data plate, which is located
in the tower behind the water container.

The steam ironing system is supplied
with a cable and moulded plug ready
for use with an alternating current of
50-60 Hz, 220-240 V. Connect the
steam ironing system only to a properly
installed earthed socket compliant with
BS 7671 in the UK. All electrical work
must be carried out by a suitable quali-
fied and competent person in accord-
ance with current local and national
safety regulations (BS 7671 in the UK).

The fuse must have a rating of at least
10 A (13 A in the UK). However, in order
to increase safety, we recommend pro-
tecting the appliance with a 30 mA re-
sidual current operated circuit-breaker
(RCD).

The appliance should be connected to
the power supply by a suitable
switched socket which must be easily
accessible.

If the power cable is defective, it must
only be replaced by a suitably qualified
electrician.

Do not use a multi-socket unit or an
extension cable to connect the
steam ironing system to the power
supply.
Extension cables or multiple sockets
do not guarantee the required safety
of the steam ironing system (e.g.
danger of overheating).

Do not connect the steam ironing
system to an off-grid inverter. These
devices are used for autonomous
power supply, e.g. a solar power
system.
Power surges could cause a safety
shutdown. This could damage the
electronics.

Do not use the steam ironing system
with what are referred to as "energy
saving plugs".
These reduce the energy supply to
the appliance, which could generate
excessive heat.

Содержание FashionMaster

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды