manualshive.com logo in svg

Miele FashionMaster, Руководство по эксплуатации, Страница: 71 / 80

Поделиться
Скачать
Miele FashionMaster Скачать руководство пользователя страница 71

Problem solving guide

71

Display messages

Problem

Cause and remedy

Message in the display:

 

Drain valve closing

When the steam ironing system was switched on, the
steam generator drain was open. The drain is closed
automatically during this message.

Message in the display:

 

Drain valve fault Switch

off/on

The descaling or rinsing processes have not been not
carried out properly.

Press the 

 button to switch the steam ironing

system off and then back on again.

If the fault message continues to be displayed,
contact Miele Service.

Message in the display:

 

Memory fault Switch off/

on

There is a fault.

Press the 

 button to switch the steam ironing

system off and then back on again.

The steam ironing system must now be reset.

Complete the steps required when using for the
first time (see "Using for the first time").

If the fault message continues to be displayed,
contact Miele Service.

Message in the display:

 

Unplug at mains

Electronic fault.

Switch off at the wall socket and withdraw the
plug.

Wait a while and then insert the plug back in the
socket and switch on.

Press the 

 button to switch the steam ironing

system back on again.

The steam ironing system will attempt to correct the
fault itself.

If the fault message continues to be displayed,
switch off at at the wall socket and withdraw the
plug. Contact Miele Service.

Содержание FashionMaster

















































































Отзывы:

Нет отзывов