Miele F 9212 I, Инструкции по эксплуатации и монтажу

Страница: 14 / 40

It is very important to set the correct
temperature for storing food in the
appliance. Micro-organisms will cause
food which is not stored at the correct
temperature to deteriorate rapidly.
Temperature influences the growth rate
of these micro-organisms. Reducing
the temperature reduces their growth
rate.
To freeze fresh food and to store frozen
food for a long time, a temperature of
-18 °C is required. At this temperature
the growth of micro-organisms is
generally halted. As soon as the
temperature rises above -10 °C, the
micro-organisms become active in the
food again so that it cannot be kept as
long. For this reason, partially defrosted
or defrosted food must not be re-frozen.
Food may be re-frozen once it has
been cooked, as the high temperatures
achieved when cooking destroy most
micro-organisms.
The temperature in the appliance will
rise:
– the more often the door is opened
and the longer it is kept open,
– if too much food is stored in it at
once,
– if too much fresh food is being frozen
at once,
– the higher the ambient temperature
surrounding the appliance.
The appliance is designed for use in
specific ambient temperatures
(climate ranges). Do not use in
ambient temperatures for which it is
not designed.
Setting the temperature
The temperature is set using the
temperature dial.
^
Using a coin, turn the On/Off dial in a
clockwise direction away from the "0"
position.
The higher the setting, the lower the
temperature in the appliance.
Forcing it beyond its range will
damage it. Turn it only as far as it will
go, then turn it back again.
Temperature display
The temperature display on the
control panel always shows the
required temperature.
For example, if you want the temperature
in the appliance to be -18 °C,
^
turn the temperature selector
clockwise from 0 until the -18°C LED
lights up on the control panel.
The temperature can be set slightly
colder within the displayed temperature
range (e.g. between -15°C and -18 °C).
^
Turn the temperature selector slowly
in a clockwise direction e.g. from the
-15°C LED position until the -18°C
LED flashes briefly in the temperature
display.
The colder temperature is now set.
The correct temperature
14