Miele F 1801 Vi Скачать руководство пользователя | Manualshive

Страница: 13 / 76

background image

The appliance is equipped with an
alarm system, to ensure that the
temperature does not rise unnoticed
because of energy loss or an open
door.

The alarm system is always
operational, it does not need to be
switched on.

Temperature alarm

If the temperature becomes too warm,
an alarm sounds and the "alarm"
indicator turns red and flashes.

The temperature display shows the
highest temperature reached during the
alarm.

The alarm will sound and the display
will flash if:

– too much warm air flows into the

appliance, for example when food is
being loaded, re-arranged, or taken
out.

– large amounts of food are being

frozen at once.

– the power fails.

Turning the temperature alarm Off

As soon as the alarm condition is
corrected, the alarm signal turns off
and the affected zone stops flashing in
the display. The "alarm" indicator goes
out.

^

To turn the alarm off early

, press

the "alarm" sensor button.
The alarm signal turns off. The "alarm"
indicator remains red and the
corresponding appliance zone
continues to flash until the alarm
condition is corrected.

If the temperature in the freezer
zone reaches 0°F (-18°C) or higher,
check that food has not defrosted.

Door alarm

If the appliance door is left open, an
alarm signal will sound and the "alarm"
indicator will turn red after five minutes.

Turning the door alarm Off

Once the door is closed the alarm turns
off and the "alarm" indicator goes out. If
the door has not been closed properly,
the alarm will sound again after five
minutes.

^

To turn the alarm off early

, press

the "alarm" sensor button. The "alarm"
indicator and signal will turn off.

Alarm

13

«
...
11
12
13
14
15
...
»

Содержание F 1801 Vi













































































Отзывы:

Нет отзывов

Похожие инструкции для F 1801 Vi

Бренд: Logik Страницы: 16

Бренд: Stoelting Страницы: 37

Бренд: NEFF Страницы: 106

Бренд: STATESMAN Страницы: 24

ICOOL2-1000 HD R290 C

Бренд: FRIGOGLASS Страницы: 128

Бренд: GE Страницы: 16

Бренд: GE Страницы: 8

Бренд: GE Страницы: 32

Бренд: GE Страницы: 16

Бренд: GE Страницы: 8

Бренд: GE Страницы: 16

Бренд: GE Страницы: 4

Бренд: GE Страницы: 16

Бренд: GE Страницы: 16

Бренд: GE Страницы: 48

Бренд: GE Страницы: 36

Бренд: GE Страницы: 60

Бренд: GE Страницы: 98

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды