Miele F 1801 SF Скачать руководство пользователя

Страница: 58 / 72

Mounting Accessories

The mounting accessories needed for
installing the appliance into the niche
are included in the packaging. Several
plastic bags are included which are
marked alphabetically.

The bag needed for each step will be
marked with its respective letter.

Use the included Torx screwdriver to
tighten the screws.

Anti-tip brackets

The anti-tip brackets help keep the
appliance safely secured to the
installation niche to prevent tipping.

Two anti-tip brackets are
recommended for each appliance or
appliance combination (side-by-side).

If the installation niche is deeper than
the appliance, a solid wooden beam

can be placed behind the anti-tip
brackets

so the appliance can be

securely attached to the base or wall.

The length of the wooden beam

should be the width of the installation
space.

If possible, always screw the
wooden beam into existing studs.

The distance "

" between the anti-tip

brackets

is the width of the

appliance.

Position the anti-tip brackets

the left and right walls of the
appliance niche.

Mark the holes through the anti-tip
brackets

on the floor of the

installation niche.

Set the brackets aside - they will be
needed later.

Screws are supplied with the
appliance for various
applications/materials.

If the anti-tip brackets cannot be
attached securely with the screws
supplied, an alternative anti-tip
device can be used.

Assure that there are no electrical
wires or plumbing in the area which
the screws could penetrate - risk of
injury and damage.

Installing the appliance

Содержание F 1801 SF









































































Результаты поиска

Содержание F 1801 SF

Отзывы:

Похожие инструкции для F 1801 SF

Бренды по названию

Популярные бренды

Miele F 1801 SF, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание F 1801 SF

Отзывы:

Похожие инструкции для F 1801 SF

Бренды по названию

Популярные бренды