Miele F 1801 SF Скачать руководство пользователя | Manualshive

Страница: 14 / 72

background image

The appliance is equipped with an
alarm system, to ensure that the
temperature does not rise unnoticed
because of energy loss or an open
door.

The alarm system is always
operational, it does not need to be
switched on.

Temperature alarm

If the temperature becomes too warm,
an alarm sounds and the "alarm"
indicator turns red and flashes and the
temperature flashes in the control
panel.

The temperature display shows the
highest temperature reached during the
alarm.

The alarm will sound and the display
will flash if:

– too much warm air flows into the

appliance, for example when food is
being loaded, re-arranged, or taken
out.

– large amounts of food are being

frozen at once.

– the power fails.

As soon as the alarm condition is
corrected the alarm with turn off and
the sensor button for alarm will go out.

Turning the temperature alarm Off

As soon as the alarm condition is
corrected, the alarm signal turns off
and the affected zone stops flashing in
the display. The "alarm" indicator goes
out.

^

To turn the alarm off early

, press

the "alarm" sensor button.
The alarm signal turns off. The "alarm"
indicator remains on until the alarm
condition is corrected.

If the temperature in the freezer
zone reaches 0°F (-18°C) or higher,
check that food has not defrosted.

Door alarm

If the appliance door is left open, an
alarm signal will sound and the "alarm"
indicator will turn red after five minutes.

Once the door is closed the alarm will
turn off and the "alarm" indicator will go
out.

Turning the door alarm Off

To turn the alarm off early:

^

The "alarm" indicator and signal will
turn off.
The alarm will turn off and the "alarm"
indicator will go out.

Temperature and door alarm

14

«
...
12
13
14
15
16
...
»

Содержание F 1801 SF









































































Отзывы:

Нет отзывов

Похожие инструкции для F 1801 SF

Marley NC NCF-06

Бренд: SPX Cooling Technologies Страницы: 8

Бренд: Gaggenau Страницы: 94

Бренд: Traulsen Страницы: 19

Бренд: NEFF Страницы: 21

Бренд: KRATOS Страницы: 18

Бренд: Grohe Страницы: 16

Бренд: Boss Страницы: 28

Бренд: NABO Страницы: 112

Бренд: ELECTRO FREEZE Страницы: 68

Бренд: ELECTRO FREEZE Страницы: 82

Бренд: Hansa Страницы: 256

Бренд: GINNY’S Страницы: 12

Бренд: Metro DataVac Страницы: 34

Бренд: TroniTechnik Страницы: 28

Бренд: Candy Страницы: 124

Бренд: Continental Refrigerator Страницы: 2

Бренд: WC Wood Страницы: 1

Designer DDRB364

Бренд: Viking Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды