Miele F 1411 Vi Скачать руководство пользователя | Manualshive

Страница: 20 / 72

background image

For the automatic ice cube maker to
operate, it must be connected to the
household water supply. See
"Plumbing".

Turning on the ice cube maker

Make sure that the ice cube container
is under the ice cube maker, as far as
possible.

Ice cubes will not be produced
unless the container is completely
closed.

^

Touch the sensor button for the ice
cube maker so that it turns yellow.

As soon as the freezer has cooled to a
freezing temperature, the ice cube tray
fills with water. Cold air is blown directly
over the tray.

As soon as the ice cubes are frozen,
they fall into the ice cube container.

The ice cube maker can produce
approx. 140 ice cubes within 24 hours.

After the appliance is turned on for the
very first time, it can take up to 10 hours
for the first ice cubes to drop out of the
ice cube maker and collect in the
container.

Once the ice cube container is full, the
ice cube maker switches off
automatically.

Do not use the ice cube container
for rapid cooling of food or drinks.
The ice cube maker may become
blocked and be damaged.

Do not use the first batch of ice
cubes from the ice cube maker.
Discard the ice produced in the first
24 hours after switching on the ice
cube maker.
This applies for the very first use,
and whenever the appliance has
been out of service for an extended
period of time.

The amount of ice cubes produced
depends on the temperature in the
freezer section. The lower the
temperature, the more ice cubes will be
produced in a given period of time.

Turning off the ice cube maker

The water supply line must be shut
off several hours before the
appliance or ice cube maker is
switched off.

^

Touch the sensor button for the ice
cube maker so that it turns white.

Ice cube maker

20

«
...
18
19
20
21
22
...
»

Содержание F 1411 Vi









































































Отзывы:

Нет отзывов

Похожие инструкции для F 1411 Vi

Бренд: A.O. Smith Страницы: 77

Бренд: Rasonic Страницы: 8

DRAZICE TO - 20.1

Бренд: Nibe Страницы: 13

Бренд: BIEMMEDUE Страницы: 11

Altherma EKHWE150A3V3

Бренд: Daikin Страницы: 10

CHD 230V 100-300W

Бренд: Carbon Heater Страницы: 20

Бренд: DeLonghi Страницы: 7

Бренд: A.O. Smith Страницы: 43

Fre-Heater D Series

Бренд: Mueller Страницы: 34

Бренд: Vastar Страницы: 4

Бренд: Newmac Страницы: 20

Optyma OP-SMLZ Series

Бренд: Danfoss Страницы: 4

Бренд: Harbor Freight Tools Страницы: 12

Бренд: Warmtech Страницы: 32

Whale Expanse DW0801U

Бренд: Munster Simms Engineering Ltd. Страницы: 27

evotherm EFI Ultra V30T

Бренд: Evolution Страницы: 48

Бренд: Duratech Страницы: 14

Heat Splasher 1295

Бренд: Swim & Fun Страницы: 84

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды