manualshive.com logo in svg

Miele F 12011 S-1, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele F 12011 S-1 Скачать руководство пользователя страница 39

Problem solving guide

39

Problem

Cause and remedy

The compressor is
switching on more fre-
quently and for longer
periods of time. The
temperature in the refri-
geration appliance is
too low.

The ventilation gaps in the housing unit have been
covered or become too dusty.

Do not block the ventilation gaps.

Dust the ventilation gaps regularly.

The appliance door has been opened too frequently,
or a large amount of fresh food has been placed in-
side or frozen at the same time.

Only open the appliance door when necessary and
for as short a time as possible.

After a while, the temperature will return to normal by
itself.

The appliance door is not properly closed.
A thick layer of ice may have formed in the freezer
zone.

Close the appliance door.

After a while, the temperature will return to normal by
itself.

If a thick layer of ice has already formed, this will af-
fect cooling and increase energy consumption.

Defrost the refrigeration appliance and clean it.

The ambient room temperature is too high. The higher
the ambient temperature, the longer the compressor
has to run.

See the information in “Location” in “Installation”.

The refrigeration appliance was not properly installed
in the niche.

See the information in “Installation” and “Installing
the refrigeration appliance”.

The compressor is
switching on more fre-
quently and for longer
periods of time, so the
temperature in the ap-
pliance is dropping.

The temperature setting is too low.

Adjust the temperature.

The Super freeze function is still switched on.

You can switch off the Super freeze function earlier
to save energy.

Содержание F 12011 S-1





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды