Problem solving guide
169
Problem
Cause and remedy
During operation an un-
usually large amount of
steam escapes, or
steam escapes from
parts of the oven where
it does not usually.
The door is not properly closed.
Close the door.
The door seal is not correctly fitted.
Press it in all the way round the door to make sure
it is fitted evenly.
The door seal is damaged, e.g. cracks can be seen.
Replace the door seal.
This can be ordered from Miele (see the end of this
booklet for contact details).
The oven interior light-
ing is not working.
The lamp is defective.
Call Miele Service to have the lamp replaced.
The control panel will
not open or close auto-
matically despite touch-
ing the
sensor sev-
eral times.
Something is obstructing the control panel.
Remove the obstruction.
The obstruction sensor is very sensitive and can pre-
vent the panel opening or shutting if it picks up a sig-
nal.
Open/close the control panel manually (see end of
this section)
If the problem occurs again, contact Miele Service.
The
Start at
and
Finish at
functions are not avail-
able.
The temperature in the oven compartment is too high,
e.g. after a programme has finished.
Open the door and let the oven compartment cool
down.
These functions are not generally available in main-
tenance programmes.
Содержание DGC 7660
Страница 178: ...Installation I N S T A L L A T I O N 178 Side view A Glass front 22 mm Metal front 23 3 mm ...
Страница 186: ......
Страница 188: ...M Nr 11 181 130 00 en GB DGC 7660 ...