Operation: Combination cooking mode
42
After use
Remove and empty the water
container and condensate container.
Push upwards slightly as you take
them out of the appliance.
Switch the steam oven off using
.
Following a cooking programme with
steam
Appliance rinsing
will appear in the
display after the steam oven has been
switched off.
This process should be carried out
every time to flush any remaining
food deposits out of the system.
Follow the instructions in the display.
After each use, clean and dry the
whole appliance as described in
"Cleaning and care".
Leave the appliance door open until
the oven interior is completely dry.
Insufficient water
If water needs replenishing during the
programme a tone will sound and a
reminder to refill the container will
appear in the display.
Remove the water container and fill it
with fresh tap water.
Push the water container into the
appliance until it connects.
Close the door.
Operation will continue.
Interrupting operation
Operation is interrupted as soon as the
door is opened. The heating will switch
off and the cooking duration remaining
stored in memory.
Danger of burning.
Steam can escape when the door is
opened.
Step back and wait until the steam
has dissipated.
Danger of burning.
You could burn yourself on the oven
interior walls, spilled food and hot
steam.
Wear oven gloves when placing food
in the oven or removing it and when
adjusting oven shelves etc. in a hot
oven
Operation will resume when the door is
closed.
The oven will heat up again and the
display will show the temperature of the
cooking compartment as it rises. Once
the set temperature has been reached,
the display will change to show the
cooking duration remaining as it counts
down.
For cooking programmes with 100 %
moisture and temperatures up to
100 °C:
The cooking programme will finish
early if the door is opened in the last
minute of cooking time (55 seconds
duration remaining).
Содержание DGC 6660 MK
Страница 166: ...Detailed dimensions of oven front 166 PureLine front ContourLine front Glass front metal front ...
Страница 178: ......
Страница 180: ...M Nr 09 616 510 05 en GB DGC 6500 DGC 6600 ...