Imp
ort
Ap
plia
nce
s.c
om
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Problem
Possible cause and remedy
The "Start at" and
"Ready at" functions
have not worked.
These functions will not work for the "Descaling"
programme.
The temperature in the oven is too high, e.g. after a
programme has finished.
^
Open the door and let the oven cool down.
The oven lighting is
not working.
The lamp is defective.
Call Miele Service to have the lamp replaced.
F
and a number
appear in the display.
F 20
The water container has not been pushed into the
appliance properly.
^
Remove the water container and push it back in so
that it connects. Then switch the appliance off and
then back on again.
The water container has become harder to put into the
appliance and take out again.
Lightly lubricate the coupling seal on the water container
with silicone grease, as described in "Cleaning and care
> Coupling seal".
F 44
Communication fault
^
Switch the appliance off and then back on again after
a few minutes.
If the fault code appears in the display again call Ser-
vice.
F 55
The maximum length of time for Fan plus operation has
been exceeded and so the appliance has switched itself
off automatically for safety reasons.
The appliance can be used again immediately by
switching it off and on again.
F ..
Other fault codes
Technical fault.
^
Switch the appliance off and call the Service
Department.
Problem solving guide
142
Содержание DGC 6300
Страница 161: ...ImportAppliances com THE EASIEST WAY TO SELF IMPORT APPLIANCES DIRECT FROM EUROPE 160 ...
Страница 162: ...ImportAppliances com THE EASIEST WAY TO SELF IMPORT APPLIANCES DIRECT FROM EUROPE 161 ...
Страница 163: ...ImportAppliances com THE EASIEST WAY TO SELF IMPORT APPLIANCES DIRECT FROM EUROPE 162 ...
Страница 164: ...ImportAppliances com THE EASIEST WAY TO SELF IMPORT APPLIANCES DIRECT FROM EUROPE 163 ...