Connection and fuse rating
This appliance is supplied for connection to an AC 230 V,
single phase 50 Hz supply,
tripping characteristic type B or C, 16 amp connection is
required.
The wires in the mains lead are coloured in accordance with
the following code:
Green/yellow
= earth
Blue
= neutral
Brown
= live
This appliance must be earthed.
Residual current device
For extra safety, it is advisable to install a residual current
device (RCD), with a trip current of 30 mA.
Disconnecting from the mains
If the appliance's electric circuit is disconnected from the
mains supply, conduct the allocation as follows, depending
on the installation:
–
Safety fuses
Completely remove fuse plugs;
or:
–
Screw-out fuse
Press the test button (red) until the middle button (black)
pops out;
or:
–
Built-in circuit breaker
(at least type B or C):
Switch the lever from 1 (on) to 0 (off); or:
–
Residual current device
Switch the main switch from 1 (on) to 0 (off) or press the
test button;
or:
– Remove the plug from the electrical socket which should
be easily accessible.
After disconnection, ensure the appliance cannot be
switched back on inadvertently.
Electrical connection
95
Содержание DG 6100
Страница 97: ...97 ...
Страница 98: ...98 ...
Страница 99: ...99 ...
Страница 100: ...M Nr 09 651 660 05 en AU NZ DG 6100 DG 6200 ...