Before using for the first time
18
Connecting via WPS
Your WiFi router must support WPS
(WiFi Protected Setup).
Switch the cooker hood off.
Press and hold the
control.
Press the lighting control at the same
time
.
2
will light up constantly,
3
will flash on
and off.
The WiFi connection must be started on
the cooker hood at the same time as on
the WiFi router.
Press the
control on the cooker
hood after a few seconds.
After a short while the
2
will light up
constantly, and the
3
and the
B
will
flash on and off.
The cooker hood is ready for connec-
tion in the next two minutes.
Start the WiFi connection on your
WiFi router.
When successfully connected the
2
and
3
will light up constantly.
Quit connection mode on the cooker
hood by pressing the Run-on con-
trol
.
The cooker hood can now be operated
via the app.
If the connection fails, you have prob-
ably not connected WPS on your router
quickly enough. Repeat the steps
above.
Tip:
If your WiFi router does not support
WPS, please connect via the
Miele@mobile app.
Содержание DA 7378 D
Страница 14: ...Guide to the cooker hood 14 ...
Страница 40: ...Installation I N S T A L L A T I O N 40 Appliance dimensions ...
Страница 46: ......
Страница 48: ...M Nr 11 477 110 00 en GB DA 7378 D ...