Activating and reprogramming the
Charcoal filter timer
(in recirculation mode)
The charcoal filter is needed for
recirculation mode.
The charcoal filter timer is
not preset
.
Before using the hood in recirculation
mode, the charcoal filter timer must be
programmed.
^
Press the On/Off
s
control to switch
the fan off.
^
Press the
+
symbol and the filter timer
button
l
at the same time.
The charcoal filter symbol
and one of
the fan power levels flash.
The
1
to
IS
indicators show the
programmed time:
Indicator
1
= 120 hours
Indicator
2
= 180 hours
Indicator
3
= 240 hours
Indicator
IS
= Deactivated
^
Press the
–
symbol to select a shorter
operating time, or the
+
symbol to
select a longer operating time.
^
Confirm the selection by pressing the
filter timer button
l
.
All the indicator lights will go out.
If the procedure is not stored within 4
minutes, the hood will automatically
default to the original setting.
Reading the filter operating hours
counter
To check the percentage of time set
already used
^
Press the On/Off control
s
to switch
the fan on.
^
Press and hold the filter button
l
:
– Once, to read the Grease filter
operating hours. The Grease filter
symbol
l
lights up.
– Twice, to read the Charcoal filter
operating hours. The Charcoal filter
symbol
lights up.
One or more of the power level
indicators will flash.
The number of flashing "
–
/
+
" indicators
show the percentage of programmed
hours that have been used.
Indicator
1
= less than 25 %
Indicator
2
= less than 50 %
Indicator
3
= less than 75 %
Indicator
IS
= less than 100 %
This information will remain stored in
memory in the event of a power failure.
Operation
15
Содержание DA 6290 W
