Miele DA 249-2, Инструкции по эксплуатации и монтажу

Страница: 17 / 36

Important for appliances with an
aluminium housing:
Aluminium is affected by the way that
light falls on it, by the surrounding envi-
ronment and by the angle you observe
it from.
Aluminium surfaces and controls
may suffer discolouration or damage
if soiling is left on them for too long.
Remove any soiling straight away.
Observe the "General notes" on clean-
ing earlier in this section.
Avoid:
– cleaning agents containing soda, ac-
ids or chlorides,
– abrasive cleaning agents, e.g. pow-
der cleaners and cream cleaners.
– abrasive sponges, e.g. pot scourers
or sponges which have been previ-
ously used with abrasive cleaning
agents,
– stainless steel cleaners,
– cleaning agents containing
descaling agents,
– dishwasher detergent,
– oven sprays.
Controls
The controls may suffer discolour-
ation or damage if soiling is left on
them for too long.
Remove any soiling straight away.
Observe the "General notes" on clean-
ing earlier in this section.
Do not use stainless steel cleaning
agents on the controls.
Glass surfaces
^
Glass surfaces can be cleaned using
a proprietary non-abrasive cleaning
agent designed specifically for use
on glass.
Avoid:
– abrasive cleaning agents, e.g. pow-
der cleaners and cream cleaners.
– abrasive sponges, e.g. pot scourers
or sponges which have been previ-
ously used with abrasive cleaning
agents,
– oven sprays.
Cleaning and care
17